Installation Procedure
WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the electrical connector (1) to the accessory inflator switch (2).
- Install the inflator switch in the inflator control panel.
- Install the lower rear quarter trim panel. Refer to Trim Panel Replacement - Rear Quarter Lower (Aztek) or Trim Panel Replacement - Rear Quarter Lower (Rendezvous) in Interior Trim.
- Install the inflator fill valve access cover.