Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Automatic Level Control Relay

Courtesy of GENERAL MOTORS CORP.

Install the relay (1) to the compressor assembly.

Fig 2: Locating Relay Bolt

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the relay nut (1) to the bracket.
Tighten: Tighten nut to 6 N.m (53 lb in)

Fig 3: Automatic Level Control Relay Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Install the electrical connector (1) to the relay (2).
Lower the vehicle.