Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: When you are servicing the automatic level control sensor link, ensure that the sensor link and the sensor arm are not damaged. Ensure the sensor arm and the sensor link are properly oriented. Improper orientation of the sensor arm and the sensor link may cause damage to the automatic level control system or the vehicle.

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.

Fig 1: Automatic Level Control Sensor Link

Courtesy of GENERAL MOTORS CORP.

Remove the ALC sensor link from the lower control arm ball stud.
Remove the ALC sensor link from the sensor arm ball stud.