LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2002 >> Aztek AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1070 (Suspension Control System - Suspension Leveling) >> Repair Instructions >> Automatic Level Control Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    IMPORTANT: When replacing the height sensor a diagnostic system check must be performed.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
    2. Fig 1: View Of Automatic Level Control Sensor Electrical Connector
    GM881329Courtesy of GENERAL MOTORS CORP.
  2. Remove the automatic level control sensor electrical connector (1).
  3. Remove the automatic level control sensor link from the lower control arm ball stud.
    4. Fig 2: Identifying Automatic Level Control Height Sensor Bracket Bolts
    GM881333Courtesy of GENERAL MOTORS CORP.
  4. Remove the automatic level control height sensor bracket bolts (1).
  5. Remove the automatic level control height sensor with the bracket from the vehicle.
  6. Remove the automatic level control height sensor link from the height sensor arm.
scientia non olet · About LEMON Manuals