Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Remove the I/P accessory trim plate. Refer to Trim Plate Replacement - Instrument Panel (I/P) Accessory (Aztek) in Instrument Panel, Gages and Console.

Fig 1: View Of HVAC Control Module Retaining Screws (Pontiac)

Courtesy of GENERAL MOTORS CORP.

Remove the HVAC control module retaining screws.

Fig 2: HVAC Control Module (Pontiac)

Courtesy of GENERAL MOTORS CORP.

Pull the HVAC control module straight out from the I/P.
Disconnect the HVAC control module electrical connectors.