LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2002 >> Aztek AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1213 (Electronic Suspension System - Automatic Level Control) >> Repair Instructions >> Air Compressor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE in General Information.
  2. Fig 1: Air Compressor Air Tube & Electrical Connection
    GM657695Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Clean the components and the surrounding area to prevent dirt from entering the air system before disconnecting the air hose from the air compressor.
  3. Disconnect the air tube (1) from the air dryer.
  4. Disconnect the electrical connection (2).
  5. Fig 2: Air Inlet, Hose & Air Compressor
    GM657691Courtesy of GENERAL MOTORS CORP.
  6. Remove the air inlet and hose (1) from the fuel filler neck bracket.
  7. Loosen the mounting nuts.
  8. Slide the air compressor (2) rearward to clear the frame slots.
  9. Remove the air compressor from the vehicle.