Adjustment Procedure
WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the electrical connector from the stop lamp switch.
- Rotate the switch counterclockwise and remove the switch from the switch retainer.
- Install the switch to the bracket by turning and pushing the switch until the switch bottoms on the brake pedal.
- Connect the electrical connector to the stop lamp switch.
- Inspect the stop lamps for proper operation
NOTE:
Proper stoplamp switch adjustment is essential. Improper stoplamp switch adjustment may cause brake drag, heat buildup and excessive brake lining wear.
IMPORTANT:
Do NOT depress the brake pedal assembly during the stop lamp switch installation. This will cause a drag condition on the brake.