Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Tail Lamp Bulb Assembly

Courtesy of GENERAL MOTORS CORP.

Install the tail lamp bulb assembly into the tail lamp housing.
Connect the tail lamp housing electrical connector.

Fig 2: View Of Tail Lamp Assembly & Backup, Sidemarker, Stop, Turn Signal Bulb

Courtesy of GENERAL MOTORS CORP.

Align the tail lamp housing with the vehicle.

NOTE: Refer to Fastener Notice .

Install the tail lamp screws to the tail lamp.
Tighten: Tighten the tail lamp screw to 2.5 N.m (22 lb in).
Close the rear compartment.