LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2002 >> Aztek AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1616 (Engine Controls And Fuel - 2.4L - Introduction) >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Fuel Tank Wiring Harness Electrical Connector
    GM1885236Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel tank. Refer to Fuel Tank Replacement (AWD)  or Fuel Tank Replacement (FWD) .
  2. Disconnect the fuel tank wiring harness electrical connector (1) from the fuel tank pressure sensor.
    3. Fig 2: Fuel Tank Pressure Sensor
    GM1885238Courtesy of GENERAL MOTORS CORP.
  3. Disengage the retaining tab (1) securing the fuel tank pressure sensor.
  4. Carefully lift and remove the fuel tank pressure sensor (2) from the fuel pump module.
scientia non olet · About LEMON Manuals