LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2002 >> Aztek AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 660 (Cruise Control System) >> Repair Instructions >> Cruise Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the cruise control module to the vehicle.
  2. Connect the cruise control cable to the cruise control module. Refer to Cruise Control Cable Replacement (4.3L Engine)  or Cruise Control Cable Replacement (4.8L, 5.3L & 6.0L Engines)  .
  3. Install the nuts in order to retain the cruise control module to the cowl. Tighten the nuts to 9 N.m (80 lb in).
  4. Connect the electrical connector at the cruise control module.
  5. Install the brace. Tighten the bolts to 9 N.m (80 lb in).
scientia non olet · About LEMON Manuals