LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2002 >> Aztek AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 731 (Automatic Transaxle [Shift Mechanism]) >> Selector Lever Component Removal/Installation >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Selector Lever Component Removal/Installation: Notes

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the battery cover.
  2. Disconnect the negative battery cable.
  3. Remove the battery, battery box and battery tray.
  4. Remove the air cleaner component. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [L3] .)
  5. Remove the console. (See CONSOLE REMOVAL/INSTALLATION .)
  6. Remove the heat insulator (front and center).
  7. Remove in the order indicated in the table.
  8. Install in the reverse order of removal.
    Fig 1: Selector Lever Component With Torque Specifications
    G00974970Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals