LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2002 >> Aztek AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 827 (Wiper System & Washer System) >> Repair Instructions >> Washer Solvent Container Level Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the washer solvent container level sensor and seal to the washer solvent container pressing in until fully seated.
    Fig 1: Positioning Washer Solvent Container Level Sensor And Seal
    G01517336Courtesy of GENERAL MOTORS CORP.
  2. Connect the washer solvent container level sensor electrical connector.
  3. Fill the washer solvent container with washer solvent.
  4. Close the hood.
    Fig 2: Connecting Washer Solvent Container Level Sensor Electrical Connector
    G01517337Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals