Scan Tool Data Definitions: Inputs

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Ambient Light Sensor: The scan tool displays inactive or active. When the ambient light sensor detects day light conditions, the scan tool will display inactive. When the ambient light sensor detects low light conditions, the scan tool will display active.

Fog Lamp Switch: The scan tool displays inactive or active. When the fog lamps are OFF, the scan tool will display inactive. When the fog lamps are ON, the scan tool will display active.

Courtesy Lamp Switch: The scan tool displays inactive or active. When the courtesy lamps are OFF, the scan tool will display inactive. When the courtesy lamps are ON, the scan tool will display active.

Headlamp Switch: The scan tool displays inactive or active. When the headlamp switch is in the OFF position, the scan tool will display inactive. When the headlamp switch is in the ON position, the scan tool will display active.

High Beam -- Low Level: The scan tool displays inactive or active. When the DRL lamps are OFF, the scan tool will display inactive. When the DRL lamps are ON, the scan tool will display active.

High Beam -- High Level: The scan tool displays inactive or active. When the high beam headlamps are OFF, the scan tool will display inactive. When the high beam headlamps are ON, the scan tool will display active.

Interior Lamp Defect Switch: The scan tool displays inactive or active. When the interior lamp defect switch is OFF, the scan tool will display inactive. When the interior lamp defect switch is ON, the scan tool will display active.

Park Brake Switch: The scan tool displays inactive or active. When the park brake is OFF, the scan tool will display inactive. When the park brake is applied, the scan tool will display active.

Park Lamp Monitor: The scan tool displays inactive or active. When the park lamps are OFF, the scan tool will display inactive. When the park lamps are ON, the scan tool will display active.