Installation Procedure
WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Refer to FASTENER NOTICE
in Cautions and Notices.
- Install the mounting bracket to the cowl panel with the 3 screws.
Tighten
Tighten the cruise control module bracket screws to 4.5 N-m (40 lb in).
- Install the cruise control module to the vehicle.
- Install the 3 nuts that retain the cruise control module to the mounting bracket.
Tighten
Tighten the cruise control module nuts to 9.0 N-m (6.6 lb ft).
- Connect the electrical connector.
- Install the cruise control cable. Refer to CRUISE CONTROL CABLE REPLACEMENT (4.3L) or CRUISE CONTROL CABLE REPLACEMENT (2.2L) .
- Connect the battery negative cable.
- Test the systems operation.