LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2002 >> Aztek AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 923 (Seat System) >> Repair Instructions >> Lumbar Switch Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the lumbar switch to the power seat switch bezel.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the lumbar switch screws.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

  3. Install the power seat switch bezel (1) to the seat. Refer to Seat Switch Bezel Replacement .
    4. Fig 1: Installing Power Seat Switch Bezel & Lumbar Switch
    GM409526Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals