LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2002 >> Aztek AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 929 (Power Take-Off System) >> Repair Instructions >> Power Take-Off (PTO) Switch Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the I/P cluster bezel. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster in Instrument Panel, Gages, and Console.
  2. Pull out the switch housing from the I/P.
    3. Fig 1: I/P Switch Housing
    GM884837Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the wire connector to the PTO switch.
  4. Remove the PTO switch from the switch housing.
scientia non olet · About LEMON Manuals