LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2002 >> Aztek AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 935 (HVAC Systems - Automatic) >> Repair Instructions >> Inside Air Temperature Sensor Assembly Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the new sensor grille to the headliner.
  2. Install the inside air temperature sensor to the headliner and sensor grille.
    Fig 1: Inside Air Temperature Sensor
    GM675994Courtesy of GENERAL MOTORS CORP.
  3. Connect the electrical connector to the inside air temperature sensor.
    Fig 2: Connecting Electrical Connector To The Inside Air Temperature Sensor
    GM675996Courtesy of GENERAL MOTORS CORP.
  4. Install the left sunshade. Refer to Garnish Molding Replacement - Center Pillar in Interior Trim.
  5. Install the left center pillar garnish molding. Refer to Garnish Molding Replacement - Center Pillar in Interior Trim.
  6. Install the left center assist handle. Refer to Assist Handle Replacement - Rear in Interior Trim.
  7. Install the left windshield garnish molding. Refer to Garnish Molding Replacement - Windshield Pillar in Interior Trim.