LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2002 >> Aztek AWD >> Repair and Diagnosis >> Suspension >> Electronic Suspension System - Automatic Level Control >> Repair Instructions >> Automatic Level Control Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

NOTE: When you are servicing the automatic level control sensor link, ensure that the sensor link and the sensor arm are not damaged. Ensure the sensor arm and the sensor link are properly oriented. Improper orientation of the sensor arm and the sensor link may cause damage to the automatic level control system or the vehicle.
  1. Raise and support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE .
  2. Remove the automatic level control sensor Electrical connector.
    Fig 1: Removing Automatic Level Control Sensor Link From Tie Rod Ball Stud
    G01747060Courtesy of GENERAL MOTORS CORP.
  3. Remove the automatic level control sensor link from the tie rod ball stud.
  4. Remove the automatic level control sensor bracket bolts.
  5. Remove the automatic level control sensor with the bracket from the vehicle.
scientia non olet · About LEMON Manuals