Section 1446 (Engine Cooling System): Specifications
WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| A/C Condenser Mounting Bolts | 6 N.m | 53 lb in |
| A/C Condenser Tube Clip Bolt | 2.5 N.m | 22 lb in |
| Coolant Heater Bolt | 2 N.m | 18 lb in |
| Cooling Fan Motor Screws | 6 N.m | 53 lb in |
| Cooling Fan Nut | 6 N.m | 53 lb in |
| Cooling Fan Shroud Bolts | 6 N.m | 53 lb in |
| Discharge Hose to Condenser Nut | 16 N.m | 12 lb ft |
| Evaporator Inlet Tube to Condenser Bolt | 16 N.m | 12 lb ft |
| Radiator Bracket Bolts | 24 N.m | 18 lb ft |
| Radiator Lower Air Deflector Bolts | 20 N.m | 15 lb ft |
| Radiator Upper Mount Bolts | 10 N.m | 89 lb in |
| Thermostat Bypass Pipe Bolt | 11 N.m | 98 lb in |
| Thermostat Bypass Pipe Nut | 25 N.m | 18 lb ft |
| Thermostat Housing Bolts | 25 N.m | 18 lb ft |
| Water Pump Bolts | 10 N.m | 89 lb in |
| Water Pump Pulley Bolts | 25 N.m | 18 lb ft |