Installation Procedure
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Install the switch to the switch panel sliding the front tabs in first. Rock the switch down in order to seat the switch completely.
- Install the screws to the window switch.
Tighten: Tighten the window switch screws to 2 N.m (18 lb in).
- Connect the electrical connector to the window switch.
- Install the power accessory switch panel. Refer to Power Accessory Switch Panel Replacement .
NOTE:
Refer to FASTENER NOTICE
.