LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2002 >> Aztek FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 893 (Lighting Systems) >> Repair Instructions >> Ambient Light Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel top cover. Refer to Trim Panel Replacement - Instrument Panel (I/P) Upper in Instrument Panel, Gages and Console.
  2. Disconnect the electrical connector (1) to the ambient light sensor on the underside of the IP top cover.
  3. Fig 1: Disconnecting Ambient Light Sensor Electrical Connector
    GM350507Courtesy of GENERAL MOTORS CORP.
  4. Turn the ambient light sensor 1/4 turn and remove it from the IP top cover.