Cross-Member: Service and Repair

Brace Replacement - Cross Vehicle

Removal Procedure

1. Remove the right front fender liner.
2. Remove the air dam.
3. Remove the wiring harness retainers.
4. Remove the front suspension support brace.




5. Remove the lower brace bolts (2).
6. Remove the lower brace (1) from the vehicle.

Installation Procedure




1. Install the lower brace (1).

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the lower brace bolts (2).

Tighten the lower brace bolts to 25 N.m (18 lb ft).

3. Install the front suspension support brace.
4. Install the wiring harness retainers.
5. Install the air dam.
6. Install the right front fender liner. Front Fender Liner Replacement.