Ignition Coil: Service and Repair

REMOVAL PROCEDURE




1. Remove the ignition control module (ICM).
2. Remove the ignition coil housing retaining bolts.
3. Remove the ignition coil housing from the camshaft cover.

INSTALLATION PROCEDURE




1. Install the ignition coil housing to the camshaft cover.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the ignition coil housing retaining bolts.

Tighten
Tighten the retaining bolts to 10 N.m (89 lb in).

3. Install the ICM.