Fuel Level Sensor: Installation
WARNING: This page is about a different car, the 2003 Pontiac Grand Am and 2003 Oldsmobile Alero. However, it is still accessible from the selected car via links, so may be relevant.
- Install the fuel level sensor (1) by sliding the sensor down in the housing. Ensure the wires are routed under the fuel level sensor. Ensure the tab locks in place.
- Slide the upper reservoir into the lower reservoir (2).
- Connect the 2 wires into the connector and lock the connector with the retaining clip.
- Connect the fuel pump and fuel level sensor harness connector and lock the connector with the retaining clip.
- Install the fuel sender assembly. See FUEL SENDER ASSEMBLY under FUEL SYSTEMS.