Torque Specifications
WARNING: This page is about a different car, the 2002 Buick Regal and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| Compressor Mounting Bolts | ||
| Front Bolt | 37 (50) | |
| Lower Bolt | 22 (30) | |
| Rear Bolt | 37 (50) | |
| Rear Bracket | 23 (31) | |
| Condenser Block Fitting Nut | 20 (27) | |
| Evaporator Block Fitting Nut | 12 (16) | |
| Evaporator Inlet Tube Nut | 20 (27) | |
| Refrigerant Line Fittings | ||
| At Accumulator | 12 (16) | |
| At Compressor (Nut) | 24 (33) | |
| At Condenser | 12 (16) | |
| At Evaporator (Bolt) | 12 (16) | |
| At Orifice Tube | 20 (27) | |
| INCH Lbs. (N.m) | ||
| A/C Compressor Pressure Relief Valve | 80 (9.0) | |
| A/C Refrigerant Filter Nut | 133 (15) | |
| A/C Pressure Sensor | 41 (4.6) | |
| Accumulator Strap Bolt | 36 (4.1) | |
| Air Inlet Housing Retaining Screw | 14 ()1.6 | |
| Blower Motor Screw | 12 (1.3) | |
| Blower Motor Resistor Screw | 13 (1.5) | |
| Heater Core Cover Screw | 13 (1.5) | |
| Heater Core Support Bracket Nut | 40 (4.5) | |
| HVAC Control Module Screws | 18 (2) | |
| HVAC Module Assembly Screws | 13 (1.5) | |
| HVAC Module Assembly Nut | 89 (10) | |
| HVAC Module Assembly Upper Mounting Screw | 14 (1.6) | |
| Recirculation Housing Screw | 13 (1.5) | |
| Temperature Actuator Screw | 13 (1.5) | |
| Vacuum Tank Screw | 13 (1.5) | |