LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2003 >> Aztek AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 630 (Body Front End) >> Specifications >> Fastener Tightening Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fastener Tightening Specifications

WARNING: This page is about a different car, the 2002 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications

Application Specification
Metric English
Air Inlet Grille Screws 2 N.m 18 lb in
Dash Panel to Reinforcement Nuts 10 N.m 89 lb in
Fender to Door Hinge Pillar Bolts 10 N.m 89 lb in
Fender to Engine Compartment Side Rail Bolts 8 N.m 70 lb in
Fender to Front Compartment Side Rail Bolts 6 N.m 53 lb in
Fender to Rocker Panel Bolts 6 N.m 53 lb in
Front End Sheet Metal Diagonal Brace at Inner Fender Bolt 47 N.m 35 lb ft
Front End Sheet Metal Diagonal Brace at Radiator Support Bolts 47 N.m 35 lb ft
Front Fender Liner Screws 7 N.m 61 lb in
Front Fender Liner to Front Bumper Fascia Screws 2 N.m 18 lb in
Front Fender Liner Nut 3 N.m 27 lb in
Hood Air Extractor Nuts 2 N.m 18 lb in
Hood Hinge to Fender Bolts 25 N.m 18 lb ft
Hood Latch Support to Lower Tie Bar Nut 10 N.m 89 lb in
Hood Latch Support to Upper Tie Bar Bolts 25 N.m 18 lb ft
Hood Latch to Center Support Bracket Bolts 25 N.m 18 lb ft
Hood Release Handle Bolts 5 N.m 44 lb in
Parking Brake Bracket Nut 5 N.m 44 lb in
Steering Column Seal Bolts 3 N.m 27 lb in
Upper Hood Hinge Bolts 27 N.m 20 lb ft