Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Nut Attaching The Foot Rest To Side Rail & Dash Panel Stud

Courtesy of GENERAL MOTORS CORP.

Place the spacer on the dash panel stud.
Position the foot rest over the spacer.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the nut to the stud.
Tighten: Tighten the foot rest nut to 10 N.m (89 lb in).
Install the nut to the side rail stud.
Tighten: Tighten the foot rest nut to 10 N.m (89 lb in).