Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Open the hood.
Drain the washer solvent from the washer solvent container.

Fig 1: Washer Solvent Level Sensor Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Disconnect the washer solvent level sensor electrical connector.

Fig 2: Washer Solvent Level Sensor To Washer Solvent Container

Courtesy of GENERAL MOTORS CORP.

Using a small flat-bladed tool, remove the washer solvent level sensor from the washer solvent container.