LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2003 >> Aztek FWD >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Entertainment System >> Repair Instructions >> Radio Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Connect the coaxial cable connector to the radio.
  2. Connect the electrical/audio connectors to the radio.
  3. Install the radio to the I/P.

    Important:  If the radio locator tab is difficult to align to the I/P locator opening, pull the radio toward you and reposition the antenna cable.

  4. Align the radio control locator tab to the I/P locator hole while carefully pressing the radio into the I/P until fully seated.
    Fig 1: Connecting Coaxial Cable Connector To Radio
    G01517456Courtesy of GENERAL MOTORS CORP.
  5. Install the radio screws.

    Tighten 

    Tighten the radio screws to 2.5 N.m (22 lb in).

  6. Install the I/P accessory trim plate. Refer to TRIM PLATE REPLACEMENT -- INSTRUMENT PANEL (I/P) ACCESSORY (AZTEK) , TRIM PLATE BEZEL REPLACEMENT -- INSTRUMENT PANEL (I/P) CLUSTER (AZTEK) or TRIM PLATE BEZEL REPLACEMENT -- INSTRUMENT PANEL (I/P) CLUSTER (RENDEZVOUS) .
  7. Perform the radio set-up procedure. Refer to RADIO SETUP  .
    Fig 2: Installing Radio Screws
    G01517457Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals