Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.

Connect the electrical connector to the switch.

Fig 1: Connecting Electrical Connector To Switch
Courtesy of GENERAL MOTORS CORP.
Install the power window switch to the trim panel by pressing down. Ensure that the retainers lock into place.

Fig 2: Installing Power Window Switch To Trim Panel By Pressing Down
Courtesy of GENERAL MOTORS CORP.