LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2003 >> Grand Prix SE >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> Repair Instructions >> Cruise Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install the cruise control module on the shock tower mounting studs.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the cruise control module retaining nuts.

    Tighten 

    Tighten the cruise control module to shock tower nuts to 2 N.m (18 lb in).

    Fig 1: Installing Cruise Control Module Retaining Nuts
    G01503795Courtesy of GENERAL MOTORS CORP.
  3. Connect the electrical connector to the cruise control module.
  4. Install the cruise control cable to the cruise control module. Refer to CRUISE CONTROL CABLE REPLACEMENT (3.1L)  or CRUISE CONTROL CABLE REPLACEMENT (3.8L)  .
    Fig 2: Installing Cruise Control Cable To Cruise Control Module
    G01503796Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals