Scan Tool Output Controls
WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
Body Control Module (BCM) Scan Tool Output Controls
| Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
| Cluster Dimming | Light Test | The BCM actuates the instrument panel lamp output when you select ON. The instrument panel lamps should illuminate until commanded OFF with the scan tool. The park lamps must be on for this function to work. |
| Daytime Running Lamps | Light Test | The BCM actuates the DRL relay for 5 seconds when you select ON. The Daytime Running Lamps should illuminate until commanded OFF with the scan tool. |
| Fog Lamps | Light Test | The BCM actuates the FOG LAMP relay for 5 seconds when you select ON. The front fog lamps should illuminate until commanded OFF with the scan tool. |
| Inadvertent Power | Inadvertent Power | The BCM deactivates the INADVERTENT POWER output when you select OFF. The foot well, IP compartment, rear compartment, vanity mirror, and courtesy lamps should be inoperative until commanded ON with the scan tool. |
| Interior Lamps | Light Test | The BCM actuates the interior lamp control for 5 seconds when you select ON. The foot well, and courtesy lamps should illuminate until commanded OFF with the scan tool. |