Powertrain Control Module: Notes
CAUTION:
Check the resistance values of all PCM relays, solenoids, and other output controls before replacing or substituting the Powertrain Control Module (PCM). Check all the sensor wiring and the PCM output control circuits for a short to ground before replacing or substituting the PCM. Perform all circuit repairs or malfunctioning component part replacements before installing a replacement or substitute PCM. This will prevent damage to the replacement or substitute PCM.
CAUTION:
Do not touch the connector pins or soldered components on the circuit board to prevent possible Electrostatic Discharge (ESD) damage to the PCM. To prevent internal PCM damage, turn the ignition switch to OFF position when installing or removing the PCM connectors, disconnecting or reconnecting the power to the PCM (battery cable, PCM pigtail, PCM fuse, jumper cables, etc.).