Cruise Control Module: Service and Repair

CRUISE CONTROL MODULE REPLACEMENT

REMOVAL PROCEDURE




1. Remove the instrument panel cluster trim plate.
2. Remove the instrument panel cluster assembly.
3. Disconnect the cruise control module electrical connector.
4. Remove the following components from the vehicle:
- The cruise control module mounting bolt
- The cruise control module

INSTALLATION PROCEDURE




1. Install the cruise control module to the IP. Secure the module with the mounting bolt.

Tighten
Tighten the cruise control module mounting bolt to 10 N.m (89 lb in).

NOTE: Refer to Fastener Notice in Service Precautions.

2. Connect the cruise control module electrical connector.
3. Install the instrument panel cluster assembly.
4. Install the instrument panel cluster trim plate.