Throttle Actuator Control Module: Installation
WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the electrical connectors to the TAC module. Align the hole in the rear mounting tab of the TAC module to the corresponding hole in the PCM mounting bracket. Position the TAC module below the rear mounting tab for greater clearance in order to install the rear retaining fastener.
- Install the TAC module rear retaining bolt. Align the front mounting holes of the TAC module. Install the TAC module front retaining bolts. Tighten the TAC module retaining bolts to specification. See TORQUE SPECIFICATIONS . Install the wheelhouse filler panel. Tighten wheelhouse filler panel bolts to specification.