LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 111 (Door System, Mirror System & Window System) >> Repair Instructions >> Window Weatherstrip Run Channel Assembly Replacement - Front >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Window Weatherstrip Run Channel Assembly - Front
    GM691011Courtesy of GENERAL MOTORS CORP.
  1. Install the weatherstrip/run channel to the door.
  2. Position the tabs on the weatherstrip/run channel into the slots in the door.
  3. Press the weatherstrip/run channel into the window frame opening.
    4. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the 2 retaining bolts.

    Tighten:  Tighten the retaining bolts to 10 N.m (88 lb in).

  5. Install the outside rearview mirror. Refer to Mirror Replacement .
  6. Install the window. Refer to Window Replacement - Front Door .
  7. Install the water deflector. Refer to Water Deflector Replacement - Front Door .
  8. Install the speaker. Refer to Speaker Replacement - Front Door in Entertainment.
  9. Install the door trim panel. Refer to Trim Panel Replacement - Side Front Door .
scientia non olet · About LEMON Manuals