LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 111 (Door System, Mirror System & Window System) >> Repair Instructions >> Window Weatherstrip Run Channel Assembly Replacement - Front >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the door trim panel. Refer to Trim Panel Replacement - Side Front Door .
  2. Remove the speaker. Refer to Speaker Replacement - Front Door in Entertainment.
  3. Remove the water deflector. Refer to Water Deflector Replacement - Front Door .
  4. Remove the window. Refer to Window Replacement - Front Door .
  5. Remove the outside rearview mirror. Refer to Mirror Replacement .
    6. Fig 1: Removing Window Weatherstrip Run Channel Assembly - Front
    GM691011Courtesy of GENERAL MOTORS CORP.
  6. Remove the 2 bolts that retain the weatherstrip/run channel to the door.
  7. Pull the weatherstrip/run channel away from the window frame opening.
  8. Carefully twist and pull up on the weatherstrip/run channel, in order remove the weatherstrip/run channel from the top of the door frame.
  9. Remove the weatherstrip/run channel from the door.
scientia non olet · About LEMON Manuals