LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 119 (Engine Control System - 4.2L (Introduction)) >> Repair Instructions >> Air Cleaner Outlet Resonator Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Air Cleaner Outlet Resonator Assembly
    GM730135Courtesy of GENERAL MOTORS CORP.
  1. Install the air cleaner outlet resonator assembly (5) to the engine making sure of the following:
    • The crankcase ventilation hose (1) is connected to the valve cover port (2).
    • The air cleaner outlet resonator (5) is properly fit to the throttle body assembly.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the two air cleaner outlet resonator to engine bolts (4).

    Tighten:  Tighten the resonator to engine bolts to 6 N.m (53 lb in).

  4. Fig 2: Top Of Engine View
    GM732051Courtesy of GENERAL MOTORS CORP.
  5. Connect the fuel pressure regulator vacuum supply to the air cleaner outlet resonator.
  6. Connect the air cleaner outlet duct to the air cleaner outlet resonator.
  7. Connect the electrical connector to the intake air temperature (IAT) sensor (1).
  8. Properly position the air cleaner outlet duct and air cleaner outlet resonator clamps (2).

    Tighten:  Tighten the clamps (2) to 4 N.m (35 lb in).