LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Engine Control System - 4.8L, 5.3L, & 6.0L - Introduction) >> Repair Instructions >> Fuel Level Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 Chevrolet TrailBlazer, and 2004 Buick Rainier. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Fuel Tank Module
    GM734434Courtesy of GENERAL MOTORS CORP.
  1. Install the fuel level sensor (3).
  2. Install the sensor retaining clip.
  3. Connect the electrical connector to the fuel level sensor.
  4. Connect the retaining clip to the fuel level sensor electrical connector.
  5. Install the fuel sender assembly. Refer to Fuel Sender Assembly Replacement .