Removal Procedure
WARNING: This page is about a different car, the 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 Chevrolet TrailBlazer, and 2004 Buick Rainier. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the fuel sender assembly. Refer to Fuel Sender Assembly Replacement .
- Remove the retaining clip from the fuel level sensor connector.
- Disconnect the electrical connector from under the fuel sender cover.
- Remove the sensor retaining clip.
- Squeeze the locking tangs and remove the fuel level sensor (3).