LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 126 (Body Rear End) >> Repair Instructions >> Module Rear Body Control Replacement - Endgate >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the trim panel from the endgate. Refer to Trim Panel Replacement - Endgate (Envoy XUV) .
    2. Fig 1: Removing Rear Body Control Module
    GM1229154Courtesy of GENERAL MOTORS CORP.
  2. Remove the screws (2) retaining the rear body control module (BCM) (1) to the endgate.
  3. Disconnect the electrical connectors from the rear BCM.
  4. Remove the module from the vehicle.
scientia non olet · About LEMON Manuals