Scan Tool Data Definitions

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

8 Digit GM Part Number: The scan tool displays the eight digit part number of the power roof module.
Average Roof Speed: The scan tool displays mm/s. The average millimeters per second that the power roof travels when opening and closing.
Battery 1: The scan tool displays 9-15 volts. The state of the battery voltage supplied to the power roof module.
Battery 2: The scan tool displays 9-15 volts. The state of the battery voltage supplied to the power roof module.
Cargo End Gate Window Sw.: The scan tool displays Active/Inactive. The cargo end gate window switch input to the PRM, where a switch press is displayed as Active.
End Gate Window Switch: The scan tool displays Idle/Up/Down. The end gate key cylinder switch input to the PRM, where a cylinder activation to the left or right is displayed as Up or Down.
Hall Sensor 1: The scan tool displays mm. The power roof motor hall sensor 1 input to the PRM displayed in millimeters.
Hall Sensor 2: The scan tool displays mm. The power roof motor hall sensor 2 input to the PRM displayed in millimeters.
Ignition Counter: The scan tool displays a numerical value. The number of ignition switch cycles.
Julian Date of Build: The scan tool displays the 4-digit date of the end gate module build.
Learned Travel Distance: The scan tool displays mm. The learned travel distance of the PRM displayed in millimeters.
Motor Current: The scan tool displays amps. The power roof motor amperage draw.
Power Mode: The scan tool displays Off Awake/Retained Accessory Power/Accessory/Run/Crank. The ignition switch input states to the PRM used for power moding.
Power Roof Switch: The scan tool displays Idle/Open/Close. The power roof switch input to the PRM, where a switch activation is displayed as Open or Closed.
Software Part Number: The scan tool displays the 8-digit part number of the power roof module software.
Software Revision Number: The scan tool displays the 2-digit revision number of the power roof module software.
Year Module Built: The scan tool displays the 4-digit date of the year the power roof module was built.