LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 161 (Disc Brake System) >> Repair Instructions >> Disc Brake Splash Shield Replacement - Front >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Splash Shield (15 Series)
    GM371033Courtesy of GENERAL MOTORS CORP.
  1. Raise the vehicle. Refer toLifting and Jacking the Vehicle in General Information.
  2. Remove the tire and wheel assembly. Refer toTire and Wheel Removal and Installation in Suspension.
  3. Remove the front hub and bearing assembly. Refer toWheel Hub, Bearing, and Seal Replacement (RWD) or Wheel Hub, Bearing, and Seal Replacement (4WD) in Suspension.
  4. Remove the retaining bolts for the splash shield.
  5. Remove the splash shield.
scientia non olet · About LEMON Manuals