Scan Tool Data Definitions: Inputs

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy Lamp Switch: The scan tool displays Inactive/Active. The input of the courtesy lamp switch is displayed as Active when the courtesy lamps are on.
Fog Lamp Switch: The scan tool displays Inactive/Active. The input of the fog lamp switch is displayed as active if the fog lamp switch is turned on.
Headlamp Switch: The scan tool displays Inactive/Active. The input of the headlamp switch is displayed as active when the headlamps switch is On.
Hi Beam On Switch: The scan tool displays Inactive/Active. The input of the high beam switch is displayed as active when the high beam headlamps are turned on.
Park Brake Switch: The scan tool displays inactive or active. When the park brake is Off, the scan tool will display inactive. When the park brake is applied, the scan tool will display active.
Park Lamp Switch: The scan tool displays On/Off. The input of the park lamp switch is displayed as On when the park lamps are command On.
Surveillance Mode Switch: The scan tool displays Inactive/Active. The input of the emergency vehicle interior lamp switch is displayed as active if the switch is turned to the off position.
Theater Dim 1 Ground: The scan tool displays Inactive/Active. The input of the theater dim 1 ground is displayed as active when the ground is present at the BCM for the theater dim lamps.
Theater Dim 2 Ground: The scan tool displays Inactive/Active. The input of the theater dim 2 ground is displayed as active when the ground is present at the BCM for the theater dim lamps.