Installation Procedure
WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
- Install the air cleaner housing (1) to the 2 rubber grommets (2) in the engine compartment.
- Install the PCM (4) with the wiring harness to the air cleaner housing (3).
- Install the air cleaner housing cover assembly (1).
- Install the 2 screws (2) to the air cleaner housing sections.
Tighten: Tighten the screws to 3 N.m (27 lb in).
- Install the air cleaner intake duct. Refer to Air Cleaner Intake Duct Replacement .
- Install the left inner fender brace. Refer to Brace Replacement - Front Fender Upper Diagonal in Body Front End.
NOTE:
Refer to Fastener Notice in Cautions and Notices.