Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the fuel lines. Refer to Quick Connect Fitting(s) Service (Metal Collar) .
Disconnect the throttle position (TP) sensor electrical connector.

Fig 1: View Of TP Sensor & Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Remove the TP sensor screws.

Fig 2: Removing TP Sensor Screws

Courtesy of GENERAL MOTORS CORP.

Remove the TP sensor and the O-ring.

Fig 3: Removing TP Sensor

Courtesy of GENERAL MOTORS CORP.