LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 233 (Sunroof System) >> Repair Instructions >> Sunroof Module Assembly Replacement (MD4) >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the sunroof module to the vehicle roof with an assistant.
    2. Fig 1: Sunroof Module & Components (MD4)
    GM317129Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the sunroof module bolts.

    Tighten:  Tighten the sunroof module bolts to 10 N.m (89 lb in).

  3. Connect the front and rear drain hoses to the sunroof module.
    4. Fig 2: Connecting Sunroof Module Drain Hoses (MD4)
    GM791513Courtesy of GENERAL MOTORS CORP.
  4. Connect the electrical connector to the sunroof motor/actuator.
    5. Fig 3: Removing/Installing Sunroof Module Electrical Connector
    GM647217Courtesy of GENERAL MOTORS CORP.
  5. Install the sunshade panel. Refer to Sunroof Sunshade Panel Replacement .
  6. Install the sunroof window. Refer to Sunroof Window Replacement .
  7. Perform the Initialization/Teach Procedure. Refer to Sunroof Motor/Actuator Initilization/Teach Process (New Motor)  or Sunroof Motor/Actuator Initilization/Teach Process (Existing Motor) .
  8. Inspect for proper operation of the sunroof. Refer to Sunroof Description and Operation .
  9. Install the headliner. Refer to Headliner Replacement (Impala) or Headliner Replacement (Monte Carlo) in Interior Trim.
scientia non olet · About LEMON Manuals