LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 273 (Supplemental Inflatable Restraint System) >> Repair Instructions >> Inflatable Restraint Instrument Panel Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Inflatable Restraint I/P Module
    GM929419Courtesy of GENERAL MOTORS CORP.
  1. Align the inflatable restraint I/P module to the I/P trim pad.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the inflatable restraint I/P module nuts.

    Tighten:  Tighten the nuts to 10 N.m (89 lb in).

  3. Route the PSIR wire harness under the locating rib and attach the metal edge clips to the I/P trim pad.
  4. Install the I/P trim pad. Refer to Trim Pad Replacement - Instrument Panel (I/P) in Instrument Panel, Gages and Console.
    5. Fig 2: Inflatable Restraint I/P Module Bracket Bolts
    GM1202160Courtesy of GENERAL MOTORS CORP.
  5. Install the inflatable restraint I/P module bracket bolts.

    Tighten:  Tighten the bolts to 10 N.m (89 lb in).

  6. Install the I/P compartment. Refer to Compartment Replacement - Instrument Panel (I/P) in Instrument Panel, Gages, and Console.
  7. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 3  and SIR Disabling and Enabling Zone 5 .
scientia non olet · About LEMON Manuals