Removal Procedure
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the rear license frame.
Release the locking tabs with a flat-bladed screwdriver.
- Remove the rear license plate.
- Remove the backup lamp assembly retaining screws.
- Partially remove the backup lamp assembly to expose the backup lamp sockets.
- Remove the backup lamp sockets from the backup lamp assembly.
Rotate the sockets counterclockwise to release the locking tabs.
- Remove the backup lamp assembly from the vehicle.