LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 331 (Lighting Systems) >> Repair Instructions >> Headlamp Bulb Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Electrical Connector To Headlamp Bulb/Socket
    GM64684Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector to the headlamp bulb/socket.
  2. Install the headlamp bulb/socket to the headlamp capsule rotating clockwise until fully seated.
  3. Install the headlamp bezel. Refer to Headlamp Bezel Replacement .
    4. Fig 2: RH Headlamp Wiring Harness Electrical Connector To Forward Lamp Wiring Harness
    GM64644Courtesy of GENERAL MOTORS CORP.
  4. Rotate the headlamp motor/actuator manual control knob clockwise to lower the headlamp.
  5. Connect the headlamp wiring harness electrical connector to the forward lamp wiring harness.
    6. Fig 3: Headlamp Actuator Knob Cover
    GM777768Courtesy of GENERAL MOTORS CORP.
  6. Install the headlamp motor/actuator knob cover.
  7. Check and adjust the headlamp aim as necessary. Refer to Headlamp Aiming (Visual Method)  or Headlamp Aiming (Export, LH Rule of the Road)  or Headlamp Aiming (Export, RH Rule of the Road) .
  8. Close the hood.
scientia non olet · About LEMON Manuals